November 21, 2026
Pressure Washer Nozzle Chart: Choosing the Right Spray Tip
By @milodtxj547
The nozzle on the end of your pressure washer lance has a bigger influence on cleaning results than most people realise. The same machine can gently rinse a car or strip paint off timber, depending entirely on the spray tip you fit. For Geelong homeowners, this matters. Salt-laden air from Corio Bay and the Bellarine coast, lichen on shaded Surf Coast fences, and tough grime on driveways in Newtown or Highton all call for different approaches. This guide explains the standard nozzle colour system, how to read a nozzle chart, and how to match the right tip to the job.
Understanding the Nozzle Colour Code
Most pressure washer nozzles follow an industry-standard colour code that indicates the spray angle, measured in degrees. A narrow angle concentrates water into a small area and delivers more impact force. A wider angle spreads the same water over a larger area, reducing force on any single spot. The colour coding is consistent across most major brands, though it is always worth checking the number stamped on the nozzle itself.
Pressure Washer Nozzle Chart
- Red (0 degrees): A pinpoint jet with extreme force. It can easily damage concrete, timber, brick, paint and skin. Most professionals avoid it entirely, and it is rarely recommended for home use.
- Yellow (15 degrees): A narrow, powerful fan for heavy-duty stripping. Suitable for removing paint from steel, cleaning heavily stained concrete, and stripping rust. Use with caution on any softer surface.
- Green (25 degrees): The all-rounder. Ideal for general cleaning of driveways, pavers, decks, fences, outdoor furniture and garden equipment.
- White (40 degrees): A wide, gentle fan for delicate surfaces. Good for cars, windows, painted surfaces, boats, caravans and weatherboard cladding.
- Black (65 degrees): A low-pressure nozzle for applying detergents and soaps. It opens the machine's chemical injector so cleaning solution can be drawn through.
Some manufacturers also include a turbo or rotary nozzle, which spins a zero-degree jet in a cone pattern. This is covered further below.
How Pressure and Flow Affect Nozzle Choice
Nozzle selection is not only about angle. Every nozzle also has an https://josueqiwn326.stonefielddigest.com/posts/how-to-protect-garden-plants-during-exterior-house-washing orifice size, which determines how much water passes through at a given pressure. This is usually expressed as a number such as 3.0, 4.0 or 5.5. The orifice size must match your machine's flow rate (litres per minute) and pressure rating (PSI or bar). If the nozzle is too small for the machine, pressure spikes and can strain the pump. If it is too large, pressure drops and cleaning performance suffers.
Most domestic electric pressure washers in Australia operate between about 1,500 and 2,500 PSI, while petrol-powered units commonly run from 2,500 to 4,000 PSI or more. Always check your machine's manual for the correct nozzle size, and replace worn nozzles with the same specification. A worn nozzle has an enlarged orifice, which gradually reduces pressure and leaves streaky results.
Matching the Nozzle to the Surface
Concrete Driveways and Paths
A green 25-degree nozzle handles most routine concrete cleaning. For oil stains or stubborn mould, a yellow 15-degree tip can help, or a turbo nozzle on a suitable machine. Keep the lance moving and maintain a consistent distance to avoid etching or zebra striping, where lighter and darker lines appear on the surface.
Timber Decks and Fences
Timber is easily damaged. Start with a white 40-degree nozzle and only move to a green 25-degree tip if needed. Always spray along the direction of the grain, and hold the nozzle at least 30 centimetres from the surface. Using too narrow an angle can raise the grain, leave fuzzy fibres and gouge softer woods such as pine, which is common in Geelong backyard decks.
Pavers and Sandstone
Pavers need care because strong pressure can blast out the jointing sand and loosen the pavers over time. A green 25-degree or white 40-degree nozzle is generally appropriate. Natural stone, including limestone and sandstone, is more porous and should be treated gently. After cleaning, joints often need to be refilled with polymeric or kiln-dried sand.
Brick, Render and Weatherboard
Wall surfaces call for lower pressure. A white 40-degree nozzle is the safest choice for painted weatherboards, rendered walls and older brickwork with softer mortar. Avoid spraying upward under cladding laps, as this can force water behind boards and into wall cavities. A black soap nozzle combined with a suitable cleaner followed by a gentle rinse is often the best method for removing mould and algae.
Vehicles, Boats and Caravans
Use the white 40-degree nozzle or a dedicated low-pressure setting. Salt exposure is common for boat owners around Geelong's waterfront and Queenscliff, so a thorough, gentle rinse is important. Keep the nozzle well away from decals, seals, rubber trims and any chipped paint, where water can lift the coating.
Roofs and Gutters
Roof cleaning is better left to trained professionals. High pressure can damage tiles, dislodge pointing and force water beneath roofing materials. Falls from roofs are also a serious safety risk. A low-pressure approach with appropriate treatments is typically the recommended method.
Specialty Nozzles Worth Knowing About
Turbo or Rotary Nozzles
A turbo nozzle spins a concentrated jet rapidly to cover a wider area with near zero-degree cleaning power. It is effective on tough, flat surfaces such as concrete and can speed up large jobs. However, it can easily mark softer materials, so it is best reserved for hard, durable surfaces.

Variable-Angle Nozzles
Adjustable lances let you twist between angles rather than swapping tips. They are convenient, but they can be less precise than fixed nozzles and may wear faster. They suit light domestic use well.
Surface Cleaners
A surface cleaner attachment uses spinning arms inside a housing to clean flat areas evenly. It reduces splash-back and removes the striping that often results from hand-held wands. It is a popular choice for large driveways and patios.
Safe Operating Tips
- Start wide and work narrower. Always test with a white or green nozzle first, and only reduce the angle if the surface can handle it.
- Test a hidden area. Try the nozzle on an inconspicuous patch to check for damage before cleaning the whole surface.
- Keep your distance. Begin around 30 to 50 centimetres from the surface and move closer gradually.
- Never point at people or animals. High-pressure water can cause serious injuries, including deep lacerations and injection injuries.
- Wear protective gear. Safety glasses, closed-in footwear and gloves are sensible precautions.
- Change nozzles with the trigger locked and the machine off. Release residual pressure before switching tips.
Water Use and Environmental Considerations in Geelong
Water efficiency is a consideration in Victoria, and pressure washers generally use less water than a standard garden hose for cleaning tasks. Choosing the correct nozzle helps you finish faster with less water. Runoff from cleaning can carry detergents, oil, sediment and paint residue into stormwater drains, which flow untreated into local waterways such as Corio Bay and Barwon River. Where possible, direct wash water onto lawn or garden areas, use biodegradable cleaning products, and avoid washing chemicals into the street. Check current Barwon Water guidance and City of Greater Geelong requirements if you are unsure about restrictions in place.
Maintaining Your Nozzles
Nozzles are small, inexpensive components that are easy to neglect. Blockages from grit or mineral deposits cause uneven spray patterns and pressure surges. Use the small cleaning needle supplied with many machines to clear the orifice, and flush the nozzle backward with water. Store tips in a dry container or nozzle holder so they do not get lost or damaged. Replace any nozzle with a distorted spray pattern, visible wear or chipped end. Hard water deposits can build up over time, so occasional soaking in white vinegar can help dissolve scale.
When to Call a Professional in Geelong
Some jobs are better handled by experienced cleaners with commercial equipment, particularly roofs, multi-storey homes, heavily stained commercial surfaces and delicate heritage materials. Professionals can match nozzles, pressure and cleaning solutions to each surface, reducing the risk of costly damage. If you are unsure which spray tip is appropriate for your property, a quick consultation can save you from repairs later.
Quick Summary
The right nozzle comes down to balancing cleaning power and surface protection. Use a green 25-degree tip for general cleaning, a white 40-degree tip for delicate surfaces, a yellow 15-degree tip only for tough, durable materials, and a black nozzle for applying detergent. Avoid the red 0-degree tip in nearly all situations. Check orifice size against your machine's specifications, start gently, and keep nozzles clean and in good condition. With the correct spray tip and a careful technique, you can clean effectively while protecting your property across Geelong and the surrounding region.
Geelong Pressure Cleaning Pros
(03) 8657 4277
❧